Produse pentru motor plat (6)

Syntech HAG Connettore Connection element between the flat head injectors and the pumping tube of manual or electric pumps, used to block water infiltration by injections of water-reactive polyurethane resins. Stop the infiltration of pressurised water in buildings by targeted injection of hydro-expansive polyurethane resins or fluid epoxy resins (Syntech IC 55). Screw the connector on the end of the high-pressure hose supplied with both manual and electric pumps, specific for masonry injections. "Clip" the connector to the "flat head" of the injector. Proceed with the injection operations. Product to buy as needed. Bulk material 1 unit

Сon le moderne macchine per tornitura CNC MAZAK siamo in grado di offrire una lavorazione di qualità di una vasta varietà di articoli. Ogni sede della torretta porta utensili ha funzioni fresanti: l’una macchina è a due mandrini mentre l’altra è dotata una quarta asse ad “Y”. Sono attrezzate con caricatori di barre. Il diametro massimo in fase di lavoro con caricabarre è di 60 mm. Il diametro massimo del pezzo lavorato è di 380 mm. Lunghezza massima del pezzo lavorato – 700 mm. Abbiamo altresì più vecchie macchine per tornitura CNC attrezzate сon caricatori di barre Hidrobar alla lunghezza di 3000 mm e diametro massimo di 42 mm. Abbiamo a disposizione anche torni universali per la lavorazione di articoli di maggiori dimensioni e serie più ridotte. Attualmente le macchine per tornitura lavorano per l’industria automobilistica, l’idraulica e la metalmeccanica.

Hohe Formgenauigkeit sowie präzise Bohrungen an gehärteten Bauteilen, erreichen wir durch das Honen. Wir verfügen auch bei diesem wichtigen Prozess über modernste Anlagen und jahrelange Erfahrung.

Flachgetriebemotoren von 0,12kW bis 160kW Leistung:0,12 KW bis 160 kW Baugröße:172- bis 976 Drehmoment:1Nm bis 15.000 Nm

In der Regel bestehen Mehrstoff-/Zweistoffdichtungen aus einem primären Dichtelement und einem sekundären Dichtelement. Das primäre Dichtelement übernimmt die eigentliche Abdichtung zum Medium. Das sekundäre Dichtelement übernimmt Funktionen wie z. B. Zentrierung und erfüllt die mechanischen Erfordernisse eines Dichtelementes. Im eingebauten Zustand befinden sich die beiden Elemente in Blocklage.

Syntech HAG Iniettore This rubber and steel injectors are to be inserted in line with the damage, cracks, loose foundations, joints, cavities and so on, then waterproofed through the use of Syntech HAG Eco and Syntech HAG Flex hydro-expansive polyurethane resins, specifically for immediately stopping water infiltration. Equipped with a “flat head” with non-return valve, it is used in conjunction with the Syntech HAG Connettore. Available in two different sizes: Syntech HAG Iniettore 120 = 120x13 mm; Syntech HAG Iniettore 170 = 170x16 mm. Stop the infiltration of pressurised water in buildings by targeted injection of hydro-expansive polyurethane resins SYNTECH H.A.G. or fluid epoxy resins (Syntech IC 55). The surfaces of application should be clean and free of any soiling, crumbling and non-adhering parts, powder, mosses, moulds, etc... Drill holes at the predetermined injection points. The injection holes will first be made with a drill bit, which should reached the required and intended depth within the wall body. Subsequently, only for the last superficial 10 cm, a second drilling will be performed in the same hole, with a drill bit bigger to create the seat where the rubber tip of the injector will be inserted. Insert SYNTECH H.A.G. INIETTORE in the intended holes. Screw the end portion of the injector with a suitable key. Screwing the injector will compress the rubber located on its tip, making it swell and thus creating the required mechanical and hydraulic seal. At this point, the injector is ready to be used. Ensure the seal of the injectors placed in the supports is secure. Given the high injection pressures reached by the pumps, in the case of injectors not positioned securely and correctly there is a real risk that they might come out at high speed from their seat (with the risk of injury to the operators!). Carefully study the positioning of the injectors near the masonry discontinuities to be injected. Bad positioning, too close to the crack to be filled, can cause the breaking of the support itself under the pressure of the pump. Product to buy as needed (about 4 pieces per metre on regular cracks). Bulk material 120 mm - Bulk material 170 mm